mesure en ligne fibres optiques, fils fins, cables

Instruments

Cables, Rods, Tubes

Since 2003, CERSA-MCI undertook the development of a line of instruments for extrusion lines, which also find applications in large diameter of steel, glass etc…The innovating process, the last technologies used, make them out standing and compact equipments, characterized by very high speed measurements, offering diameter measurement and fine defect detection with high accuracy and resolution.

These instruments benefit a common technology and a software environment call Laser Sensor (LS). This line only use static components, without moving parts (mirror). The measures are wire or cables vibration measurement independents in production lines.The metrological characteristics are indicated for each individual measures (no averaging).

They all are tested and temperature compensated between 10 and 40°C. They all benefit of a dust protection system.


Ξ One axis diameter measurement: LPSx1

high speed measurement, Cables, rods, tubes

LPS..S1: Laser Projection Sensor Standard

200 Hz fixed measurement frequency.

  • LPS005-S : Ø from 0.3 to 5mm ±2µm, (0.01 to 0.2” ± 0.08mils)
  • LPS020-S : Ø from 0.5 to 20mm ±6µm, (0.02 to 0.8” ± 0.24mils)

    LPS..H1 : Laser Projection Sensor High frequency

    20 kHz fixed measurement frequency .

  • LPS005-H1 : Ø from 0.5 to 5mm ±6/12/24µm, (0.01 to 0.2”)
  • LPS020-H1 : Ø from 1 to 20mm ±20/40 µm, (0.02 to 0.8”)
  • LPS080-H1: Ø from 4 to 80mm ±80 µm, (0.04 to 3”) diameter measurement, cables, rods, tubes

    LDS1000..U1 : Laser Diffraction Sensor Ultra High frequency

    100 kHz fixed measurement frequency.

  • LDS1000-U1: Ø from 0.05 to 1mm ±0.05 to 1 µm (2 to 40mils)

     

  • Options are available for these instruments, like :

    Oscillating support for in line shape measurement.

    Portable instruments, battery powered. (on board data recording and PC transfer).

    4 standard wires for calibration.

    Softwares for shape measurements (stranded, shape cross sections…)
    Voir LS technologies

    Applications to cables, metallic wires, tubes, profiles..

    Ξ 3 axes high frequency diameter measurement.

    LPSN..-H3: Laser Projection Sensor High frequencyhigh frequency measurement, cables, rods, tubes

    Fine Diametor fluctuation detection

    20/40/80 kHz adjustable measurement frequency per axe

    Ø from 0.5 to 5mm ±6/12/24 µm, (0.01 to 0.2”)

    Ø from 1 to 20mm ±20/40 µm (0.02 to 0.8”)

    Ø from 4 to 80mm ±80 µm (0.04 to 3”)

    .

    .

    4 reference wires in a box for instrument accuracy check.


    In production line applications for extrusion machines: cables, rods, tubes,….

    .

    Ξ Surface quality check for wires and cables. (international patent)

    • SQM-L : Surface Quality Measurement-Large diametersSurface quality check for wires and cables

      For diameters from 0.5 to 80mm (0.01 to 3”) with the same casings and electronic concepts, the same diameter ranges than the LPSNH3.

      The SQM-L are made to continuously check in line 100% of the wire and cable surfaces with a very high resolution.

      .

      From 3072 points per turn with 20 000 turns per second, to 384 points per turn with 160 000 turns per second, software adjustable, the SQM-L

      is a true technology revolution in surface quality check and defect detection in production lines.

      .

      .

      Ξ Advanced information.

      Applications to wires, cables, rods, tubes